Dell PowerVault ML6000 - Manual (Page 135)

Chapter 6 Advanced Reporting
Working With Advanced Reporting Reports
Dell PowerVault ML6000 User’s Guide 135
•
Attribute
— Specifies which values are included in the report. Select
one of the following:
• Data Written/Read (default) — The amount of data written to
and read from each tape drive, shown separately in the chart.
• Total Read and Write — The combined total amount of data
written to and read from each tape drive.
• Media Mount Count — The number of tape cartridge mounts.
• Media Mount Time — The total amount of time media spent in
the selected drive(s).
• Media Motion Time — The total amount of time media spent in
motion while in the tape drive (writing, reading, rewinding, etc.).
•
Chart
— How the data is displayed in the chart. Select Area, Bar
(default), Line, or Pie.
•
Type
— The chart type. Select one of the following:
• Rollup (default) — Displays the Grouping on the x-axis and the
Attribute amount on the y-axis.
• Trend — Shows how the Attribute amount changes over time for
the selected Grouping.
•
Grouping
— Specifies which tape drive(s) or partition(s) to include in
the report. Select one of the following:
• All Drives by Coordinate (default) — Presents the sum total of
the selected Attribute for all tape drives according to their
location in the library. If more than one tape drive resided in that
location during the selected Date Range, then the Attribute
values for all the tape drives that resided in that location are
combined in the chart.
• All Drives by Physical SN — Presents the sum total of the
selected attribute for all drives according to the physical tape
drive serial number.
• All Partitions — Presents a comparison of all drives grouped by
partition in the physical library.
• Selected Drive by Coordinate — The report chart is based on an
individual tape drive location in the library. If more than one
tape drive resided in that location during the selected Date
Range, then the attribute values for all the tape drives that
resided in that location are combined in the chart.