Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 87)

5–3 Configuring PanelView Terminals
Publication 2711E-6.17 – November 1998
With the Mode Select Keyswitch set to Configure mode, the 1000e,
1200e, and 1400e terminals display a Terminal Configuration screen.
For 1000e, 1200e, and 1400e Keypad terminals, the screen includes
function key labels. For 1000e, 1200e, and 1400e Touch Screen
terminals, the screen excludes function key labels .
The example below is for 1000e and 1400e Keypad terminals.
The example below is for the 1200e Keypad terminal. The screen
includes the Align Screen function.
To enable or disable Run Mode, choose the Security button and
select the Mode Switch tab. Set the Software Mode Switch to Enable
or Disable. For more details, see Mode Switch in this chapter.
Note: The Cancel button on subsequent screens discards any
changes made.
The Configuration Mode
Menu
"