Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 121)

5–37 Configuring PanelView Terminals
Publication 2711E-6.17 – November 1998
To enable or disable alarm relay:
" Choose the Alarm Relay button or corresponding function key to
enable or disable the relay. The default setting is Enable.
To test the alarm relay:
1. Connect a contact device such as a bell or alarm to the terminal’s
alarm relay. See Appendices A, B, and C for relay specifications.
2. Choose the Test Relay button or corresponding function key. See
Figures 2.1, 3.1, and 4.1 for the location of the alarm relay on the
1000e, 1200e, and 1400e terminals.
3. Choose the test button (On) to energize the relay, and release it
(Off) to de-energize it. The Test Relay is inactive if the Alarm
Relay is disabled.
To set the number of alarm history records to be displayed:
" Choose the Number of Alarm History Records button to select
either 128, 500, 1000, 1500, or 2500. The default setting is 128
alarm history records.
To enable or disable the Clear All button:
" Choose Alarm History Clear All Button or corresponding
function key to enable or disable the button. The default setting is
Disable.
If Enable is selected, the Clear All button in the Alarm History
screen is enabled. If Disable is selected the Clear All button in the
Alarm History screen is grayed-out.
To enable or disable the Acknowledge All button:
" Choose the Alarm History Ack. All Button or corresponding
function key to enable or disable the button. The default setting is
Disable.
If Enable is selected, the Acknowledge All button in the Alarm
History screen is enabled. If Disable is selected the Acknowledge
All button in the Alarm History screen is grayed-out.