Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 48)

2–17 Installing PanelView 1000e Terminals
Publication 2711E-6.17 – November 1998
Using the PCMCIA Card Slots
The PCMCIA card slots support the PCMCIA memory cards, written
to in FAT file format. Only slot 1 is active. Slot 2 is covered with a
protective label. If a card is inserted to slot 2, there will be no
activity. See Figure 2.1 for the location of the PCMCIA card slots on
the bottom of your terminal.
Using a Keyboard or Bar Code Reader
The terminal supports a keyboard or a bar code reader, which you
can connect to the terminal’s keyboard port. See Figures 2.16 and
2.17 for the location of the keyboard port on the bottom of the
terminal. The keyboard port is covered with a protective, clear label.
Remove the label to expose the keyboard port.
The supported keyboards (A-B Part Numbers 6189-KBM1,
6189-KBD1, and 6189-KBE1) or supported bar code reader (A-B
Part Number 2755HDG4 Series A, Revision C) can be used with:
•
ASCII Input Objects (for touch screen and keypad terminals)
•
Numeric Entry Keypad Object (for touch screen terminals only)
•
Numeric Keypad Enable Button (for keypad terminals only)
•
Numeric Input Cursor Point (for keypad terminals only)
•
Set Bit Cursor Point (for keypad terminals only)
For more information on touch screen or keypad input objects, see
the PanelBuilder 1400e Configuration Software for Windows
Reference Manual.
Figure 2.16 shows the keyboard connection to the PanelView 1000e
terminal. Figure 2.17 shows the bar code reader connection to the
PanelView 1000e terminal, with the option of connecting the
keyboard.