Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 25)

1–12 Introducing the PanelView Terminals
Publication 2711E-6.17 – November 1998
•
The PanelView 1200e terminal is available in four models:
– color touch screen clip mount (2711E-T12C6)
– color touch screen stud mount (2711E-T12C4)
– color keypad stud mount (2711E-K12C6)
– color keypad stainless steel stud mount (2711E-K12C6L2)
•
The 1400e terminal is available in four models:
– color touch screen stud mount (2711E-T14C6)
– color keypad stud mount (2711E-K14C6)
– color touch screen stud mount with ControlNet support
(2711E-T14C7, 2711E-T14C15)
– color keypad stud mount with ControlNet support
(2711E-K14C7, 2711E-K14C15)
•
The front panels of the PanelView 1000e, 1200e, and 1400e
terminals have new graphics.
•
The PanelView 1000e and 1400e terminals have analog resistive
touch screens.
•
The PanelView 1400e terminal has an analog resistive touch
screen with built-in, anti-glare glass.
•
The PanelView 1000e terminals run only firmware versions 3 and
above. The PanelView 1200e and 1400e terminals run firmware
versions 1 and above. The application you run on PanelView
1000e, 1200e, and 1400e terminals is displayed in a pixel
graphics format, rather than a character-based format.
•
The logic board for PanelView enhanced terminals has a
communication slot for communication options, such as
ControlNet.
•
The keyboard port for the PanelView 1000e and 1400e terminals
is supported by the PanelView firmware.
Table 1.D outlines the main changes that have been made to the
memory configuration on the terminal’s logic board.