Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e User Manual

Page 137

background image

5–53

Configuring PanelView Terminals

Publication 2711E-6.17 – November 1998

You only reset the hours for the backlight time after you change the
backlight.

To reset the hours for the backlight time:

"

Choose the Reset Accumulated Backlight Time button or the F1
function key. A confirmation message is displayed, as shown in
the following example.

For PanelView 1200e/1400e terminals, Hours Logged tracks the
number of hours of operation for the terminal (see figure below).
This information allows you to track the total power-on time.