Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 11)

Preface
Publication 2711E-6.17 – November 1998
Preface
This manual describes the PanelView 1000e, 1200e, and 1400e
operator terminals and includes information about the following:
•
installing your PanelView terminal
•
configuring your PanelView terminal
•
verifying or testing your PanelView terminal
•
maintaining your PanelView terminal
•
troubleshooting your PanelView terminal
Note: This manual also applies to the enhanced PanelView 1200
Series F and higher terminals running PanelView 1400e firmware.
Chapter 1, Introducing the PanelView Terminals, provides an
overview of the PanelView 1000e, 1200e, and 1400e terminal family,
summarizes new features, and lists applicable PLCs and connections.
Chapters 2, 3, and 4, Installing PanelView 1000e/1200e/1400e
Terminals, provide installation instructions, equipment dimensions,
and mounting options for each model.
Chapter 5, Configuring PanelView Terminals, describes the power-up
tests and how to configure your terminal.
Chapter 6, Verifying PanelView Terminal Operation, describes how
to verify the terminal is communicating correctly, explains the
download procedure for the demo package, and describes testing
retentive objects and the overall system.
Chapter 7, Maintaining PanelView Terminals, provides maintenance
instructions to ensure the longevity and top performance of your
terminal.
Chapter 8, Troubleshooting PanelView Terminals, lists the fault and
error messages that could occur in Configure or Run mode and
provides information to solve problems quickly.
Appendix A contains the Specifications for the PanelView 1000e
terminal.
Appendix B contains the Specifications for the PanelView 1200e
terminal.
Appendix C contains the Specifications for the PanelView 1400e
terminal.
About This Manual
"