Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 29)

1–16 Introducing the PanelView Terminals
Publication 2711E-6.17 – November 1998
6008-SV VME I/O Scanner
This module can be installed in a VME backplane, providing the
VME controller with an Allen-Bradley 1771 Remote I/O Link.
Allen-Bradley Remote I/O racks and devices such as the PanelView
1000e/1200e/1400e terminal can then be connected to this VME
controller.
6008-SQ DEC Q-BUS I/O Scanner
This module can be installed in a DEC Q-Bus controller to provide it
with an Allen-Bradley 1771 Remote I/O Link. Allen-Bradley
Remote I/O racks and devices such as the PanelView
1000e/1200e/1400e terminal can then be connected to this controller.
DH+ Communications
The terminal can be connected to a DH+ network directly so the
terminal can communicate with several controllers simultaneously. It
can be connected to the following host controllers over DH+.
Logix55xx
You can connect one or more terminals to a 1756-DHRIO
DH+/Remote I/O Module.
PLC-5/10, 5/11, 5/15, 5/20, 5/25, 5/30, 5/40, 5/60, 5/80, 5/40L,
5/60L, 5/80L
You can connect one or more terminals directly to one of the PLC-5
family of programmable controllers over DH+ so the terminal can
communicate with several controllers simultaneously.
SLC-5/04
You can connect one or more terminals directly to one of the
SLC-5/04 family of programmable controllers over DH+ so the
terminal can communicate with several controllers simultaneously.
PLC2/PLC3
The terminal supports communications to one or more PLC2s or
PLC3s via offlink addressing: the PLC2 also communicates by a
1785-KA module (DH+ to DH bridge), and the PLC3 communicates
by a 1775-KA module.