Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 125)

5–41 Configuring PanelView Terminals
Publication 2711E-6.17 – November 1998
Terminal Display Intensity (1000e only)
Use the Display Intensity tab in the Terminal Response screen to
adjust the brightness of the terminal display.
To set the Terminal Display intensity:
1. In the Terminal Response screen, select the Display Intensity tab
to display the following screen.
2. Use the Backlight Intensity Level to cycle through the display
intensity levels from 50% to 100%. The default is set at the
maximum intensity level, which is 100%.
You can adjust the screen alignment on the 1200e terminals.
Note: There is no user-adjustable alignment or adjustment for the
1000e or 1400e terminals.
To align the 1200e screen:
" Choose the Align Screen button to display the following screen.
Aligning the 1200e Screen
"