Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 26)

1–13 Introducing the PanelView Terminals
Publication 2711E-6.17 – November 1998
Table 1.D Memory Configuration on PanelView 1200 (Series
F and above) and PanelView 1000e, 1200e, and 1400e
Operator Terminals
Memory Type PanelView 1000e Terminal PanelView 1200 Terminal (Series
F and Above) PanelView 1200e and 1400e
Terminals
User RAM (SRAM)
(Battery-backed) 128K of battery-backed static RAM
(stores the terminal configuration
parameters, alarm status and
history, retentive data; no application
file storage) 128K (stores the terminal
configuration parameters, alarm
history, and application file) 128K of battery-backed static RAM
(stores the terminal configuration
parameters, alarm status and
history, retentive data; no application
file storage)
Flash 1.75 MB for firmware; 2.25 MB for
application file storage 256K (stores firmware and BIOS);
no flash for application file storage 1.75 MB for firmware; 256K for
application file storage
E/EPROM N/A Optional 64K/128K E/EPROM
(provides backup application file
storage) N/A
PCMCIA memory card
support Provides application file storage up
to 15.75 MB 1.75 MB for firmware; application file
storage up to 2.25 MB for enhanced
F and above terminals Provides application file storage up
to 15.75 MB
If you have complex user applications in PanelView terminals and
you use PanelView Version 5 firmware’s new features, we
recommend that you increase the system RAM in the PanelView
terminal. For PanelView 1000e terminals, you can install a 4-MB
RAM DIMM (A-B Catalog Number 2711E-URAM1). For
PanelView 1400e terminals, you can install a 4-MB RAM SIMM
(A-B Catalog Number 2711E-URAM2).
PanelView Version 5 firmware provides the following additional
features:
•
ControlNet scheduled communications using the 1784-KTCs card
•
ControlLogix Legacy mode support
•
ControlLogix gateway file transfer and alarm history support
•
Enhanced printer support
•
Dataliner display device support
•
Enhanced alarm features
•
Keyboard support for PanelView 1000e and 1400e terminals
•
115.2K and 230.4K baud rate for DH+ communications
Additional Features of the
PanelView Terminals