Character set, User memory, Alarm relay – Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e User Manual
Page 187: Batteries

Specifications: 1400e Operator Terminal
C–8
Publication 2711E-6.17 – November 1998
PanelView 1400e terminals support the IBM character set for alarm,
local, and information messages.
PanelView 1400e terminals support:
•
256K bytes of Flash memory for application file
•
PCMCIA card slot of variable size (depends on user application
file)
RAM tests and Memory Checksum tests can be initiated in the
Terminal Diagnostics screen in Configuration mode.
•
Form-C Contact
•
250 V ac Max, 8 amp continuous
•
30 V dc Max, 8 amp continuous
•
Minimum Voltage: 1 V dc
•
Minimum Current: 1 mA dc
PanelView’s permanent, factory-installed lithium batteries have a
total lithium weight of not more than 1.0 gram. Batteries are not
burdened when ac power is applied to the terminal. The following
chart indicates battery life, with continuous exposure to the specified
temperatures, assuming ac power is applied to the terminal 8 hours a
day, 5 days a week. These calculations are based on battery life
specifications provided by the battery manufacturer and do not take
battery shelf life into account.
ББББББББ
ББББББББ
+86
°
F (+30
°
C)
ББББББББ
ББББББББ
Greater than 10 years
ББББББББ
ББББББББ
+104
°
F (+40
°
C)
ББББББББ
ББББББББ
Greater than 10 years
ББББББББ
ББББББББ
+113
°
F (+45
°
C)
ББББББББ
ББББББББ
Greater than 10 years
ББББББББ
ББББББББ
+122
°
F (50
°
C)
ББББББББ
ББББББББ
10 years
ББББББББ
ББББББББ
+140
°
F (60
°
C)
ББББББББ
ББББББББ
7.5 years
Battery fail indications are displayed automatically.
Character Set
User Memory
Alarm Relay
Batteries