Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 78)

4–11 Installing PanelView 1400e Terminals
Publication 2711E-6.17 – November 1998
Connecting the Upload/Download Cable
The RS-232 port connects the terminal to the host computer for
uploading and downloading application files using the RS-232 serial
cable (Upload/Download cable). The cable is available in a separate
kit (A-B Catalog Number 2711-NC1).
The Upload/Download cable can be connected to a computer with a
25-pin, RS-232 port (IBM PC AT
®-type computers). Use the cable
pinout shown in Figure 4.8 to connect the terminal to the host
computer. For instructions about transferring files using the
Upload/Download cable, refer to the PanelView e Transfer Utility
User Manual.
Figure 4.8 RS-232 Port Pinout for Upload/Download Cable
Connection
RXD (2)
TXD (3)
CTS (4)
RTS (5)
DTR (6)
Common (7)
DCD (8)
DSR (20)
TXD (3)
RXD (2)
RTS (7)
CTS (8)
DSR (6)
Common (5)
DCD (1)
DTR (4)
SHIELD (1) NC
PanelView Terminal Cable End
RS-232 Port Pinout
Female, 25-pin Host Computer Cable End
RS-232 Port Pinout
Female, 9-pin
Connecting the Serial Printer
To connect a serial printer to the terminal, you must construct your
own cable. Use the pinout as shown in Figure 4.9 to construct the
terminal end of this cable. To construct the printer end of the cable,
consult your printer’s user manual.
Figure 4.9 RS-232 Port Pinout for Serial Printer Cable
Construction
20157
RXD (2)
SHIELD (1)
TXD (3)
CTS (4)
Common (7)
DTR (6)
RTS (5)
DSR (20)
RS-232 Serial Interface
Female, D-sub, 25-pin connector
DCD (8)
Pin 1
Pin 14