Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 67)

3–17 Installing PanelView 1200e Terminals
Publication 2711E-6.17 – November 1998
Using the PCMCIA Card Slot
The PCMCIA card slot supports the PCMCIA memory cards, written
to in FAT file format. Figure 3.1 shows the location of the PCMCIA
card slot on the back of your terminal.
For enhanced PanelView 1200 Series F and G terminals:
The PanelView 1200 Enhancement Kit (A-B Catalog Number
2711E-U1B12C) comes with the 4-MB PCMCIA card preloaded
with firmware.
In an enhanced Series F or above PanelView 1200 terminal, you can
also use any of the cards listed in Appendix B to store firmware and
application files. The firmware occupies up to 1.7 MB of space on
the PCMCIA card; the space remaining is available for application
file storage. Refer to the PanelBuilder 1400e Configuration Software
for Windows User Manual for information on using the PCMCIA
card.
For a PanelView 1200e terminal:
In a PanelView 1200e terminal, you can use any of the cards listed in
Appendix B for application file storage.