Rockwell Automation 1771-QDC PLASTIC MOLD.MODULE User Manual
Page 168
2–102
Command Word/Bit Descriptions
Publication 1771-6.5.88 – July 1997
Notes: 1. For [ ] engineering units, see page 3.
2. When using the Inject/Clamp/Eject mode, all pressure readings are system pressure at input 2, except where noted.
Unselected Valve Set-output Values
When the module starts the Second Clamp Open Profile, it:
•
sets its unselected outputs to the values listed below
•
ignores the unselected value of the selected output
•
uses ramp rates SOC17 - SOC32 to ramp unselected outputs
if
then
the module is commanded to start the
Ejector Profile during this SOC Profile
this SOC Profile surrenders control of the
unselected valve that is the selected
Ejector Profile valve
the module is commanded to start this SOC
Profile during the Ejector Profile
the Ejector Profile gives control of all of its
unselected valves to this SOC Profile
Second Clamp Open and Ejector Profiles
are run concurrently
all outputs that are unselected in both
profiles are controlled by this SOC Profile
Word
Description
SOC09
Output #1 Set-output Value during Profile [19]
SOC10
Output #2 Set-output Value during Profile [19]
SOC11
Output #3 Set-output Value during Profile [19]
SOC12
Output #4 Set-output Value during Profile [19]
SOC13
Output #5 Set-output Value during Profile [19]
SOC14
Output #6 Set-output Value during Profile [19]
SOC15
Output #7 Set-output Value during Profile [19]
SOC16
Output #8 Set-output Value during Profile [19]
Output Ramp Rates
The module uses the following ramp rates when moving its outputs
between setpoints during the Second Clamp Open Profile. The module
interprets a ramp rate of zero as a step function ramp (ramp disable).
Word
Description
SOC17
Output #1 Acceleration Ramp Rate during Profile [20]
SOC18
Output #2 Acceleration Ramp Rate during Profile [20]
SOC19
Output #3 Acceleration Ramp Rate during Profile [20]
SOC20
Output #4 Acceleration Ramp Rate during Profile [20]
SOC21
Output #5 Acceleration Ramp Rate during Profile [20]
SOC22
Output #6 Acceleration Ramp Rate during Profile [20]
SOC23
Output #7 Acceleration Ramp Rate during Profile [20]
SOC24
Output #8 Acceleration Ramp Rate during Profile [20]
SOC25
Output #1 Deceleration Ramp Rate during Profile [20]
SOC26
Output #2 Deceleration Ramp Rate during Profile [20]
SOC27
Output #3 Deceleration Ramp Rate during Profile [20]
SOC28
Output #4 Deceleration Ramp Rate during Profile [20]
SOC29
Output #5 Deceleration Ramp Rate during Profile [20]
SOC30
Output #6 Deceleration Ramp Rate during Profile [20]
SOC31
Output #7 Deceleration Ramp Rate during Profile [20]
SOC32
Output #8 Deceleration Ramp Rate during Profile [20]