Rockwell Automation 1771-QDC PLASTIC MOLD.MODULE User Manual
Page 165

2–99
Command Word/Bit Descriptions
Publication 1771-6.5.88 – July 1997
SCC
Output Ramp Rate
The module uses the following ramp rates when moving its outputs
from setpoint to setpoint during the Second Clamp Close Profile.
The module interprets a ramp rate entry of zero as a step function
ramp (ramp disable).
Word
Description
SCC17
Output #1 Acceleration Ramp Rate during Profile [20]
SCC18
Output #2 Acceleration Ramp Rate during Profile [20]
SCC19
Output #3 Acceleration Ramp Rate during Profile [20]
SCC20
Output #4 Acceleration Ramp Rate during Profile [20]
SCC21
Output #5 Acceleration Ramp Rate during Profile [20]
SCC22
Output #6 Acceleration Ramp Rate during Profile [20]
SCC23
Output #7 Acceleration Ramp Rate during Profile [20]
SCC24
Output #8 Acceleration Ramp Rate during Profile [20]
SCC25
Output #1 Deceleration Ramp Rate during Profile [20]
SCC26
Output #2 Deceleration Ramp Rate during Profile [20]
SCC27
Output #3 Deceleration Ramp Rate during Profile [20]
SCC28
Output #4 Deceleration Ramp Rate during Profile [20]
SCC29
Output #5 Deceleration Ramp Rate during Profile [20]
SCC30
Output #6 Deceleration Ramp Rate during Profile [20]
SCC31
Output #7 Deceleration Ramp Rate during Profile [20]
SCC32
Output #8 Deceleration Ramp Rate during Profile [20]
End of Profile Set-output Values
When the module completes the second clamp close profile and
CPC03-B09 is set, it:
•
sets its outputs to the following values
•
sets status bit SYS22-B01
•
uses ramp rates SCC17 - 32 when changing outputs to these values
Use these values for setting cores if applied before starting the Third
Clamp Close Profile:
Word
Description
SCC33
Output #1 Set-output Value at End of Profile [19]
SCC34
Output #2 Set-output Value at End of Profile [19]
SCC35
Output #3 Set-output Value at End of Profile [19]
SCC36
Output #4 Set-output Value at End of Profile [19]
SCC37
Output #5 Set-output Value at End of Profile [19]
SCC38
Output #6 Set-output Value at End of Profile [19]
SCC39
Output #7 Set-output Value at End of Profile [19]
SCC40
Output #8 Set-output Value at End of Profile [19]