Rockwell Automation 20D PowerFlex 700S AC Drives with Phase II Control Programming Manual - Manual (Page 126)

126 Rockwell Automation Publication 20D-PM001C-EN-P - July 2013
Chapter 2 Programming and Parameters
1110 DelayTimer1PrSet
The time that the value in Par 1111 [DelayTimer1Accum] must reach before bit 2 “Timer Done” in Par 1112
[DelayTimer1Stats] is set.
Note: This parameter was added for firmware version 3.001.
Units:
Default:
Min/Max: s
0
0/600.00 Y RW 16-bit
Integer
1111 DelayTimer1Accum
The amount of time that has elapsed since the timer was enabled ( Par 1112 [DelayTimer1Stats], bit 2 set).
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max:
Units: 0
0/600.00
s RO 16-bit
Integer
1112 DelayTimer1Stats
Displays the status of the user-defined on or off delay timer.
Bit 0 “Timer Enable” when this bit is set, the timer is enabled.
Bit 1 “Timer Timing” when this bit is set, the timer is running.
Bit 2 “Timer Done” when this bit is set, the timer is done.
Note: This parameter was added for firmware version 3.001.
1113 DelTmr2 TrigData
Link a word to this parameter that will control a user-defined on or off delay timer. The bit within the selected
word that will control the delay timer is set by
Par 1114 [DelTmr2 Trig Bit]. The user-defined on/off delay timer is
enabled by setting bit 6 “Delay Timer” of Par 1000 [UserFunct Enable].
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max: 0
32 bits of data Y RW 32-bit
Boolean
1114 DelTmr2 Trig Bit
Selects the bit, from the word linked to Par 1113 [DelTmr2 TrigData], that will change the status of the user-
defined delay timer to on or off. When Par 1114 [DelTmr2 Trig Bit] is a positive number, the delay timer is an “on”
timer. When Par 1114 is a negative number, the delay timer is an “off” timer.
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max: 0
-/+32 Y RW 16-bit
Integer
1115 DelayTimer2PrSet
The time that the value in Par 1116 [DelayTimer2Accum] must reach before bit 2 “Timer Done” in Par 1117
[DelayTimer2Stats] is set.
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max:
Units: 0
0/60000
s Y RW 16-bit
Integer
1116 DelayTimer2Accum
The amount of time that has elapsed since the timer was enabled ( Par 1117 [DelayTimer2Stats], bit 1 set).
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max:
Units: 0
0/60000
s RO 16-bit
Integer
1117 DelayTimer2Stats
Displays the status of the user-defined on or off delay timer.
Bit 0 “Timer Enable” when this bit is set, the timer is enabled.
Bit 1 “Timer Timing” when this bit is set, the timer is running.
Bit 2 “Timer Done” when this bit is set, the timer is done.
Note: This parameter was added for firmware version 3.001.
1120 Home Accel Time
Acceleration rate when Homing.
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max:
Units: 10.00
0.01/6553.50
s Y RW Real
1121 Home Decel Time
Deceleration rate when Homing.
Note: This parameter was added for firmware version 3.001.
Default:
Min/Max:
Units: 10.00
0.01/6553.50
s Y RW Real
1122 Home Speed
Speed reference used when Homing.
Notes: This parameter was added for firmware version 3.001. The default value was changed from “0.000” to
“0.005” for firmware version 4.001.
Default:
Min/Max:
Units: 0.005
-/+ 8.000
rpm Y RW Real
No. Name
Description Values
Link
able
Re
ad
-Write
Da
ta
T
yp
e
Options
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Ti
me
r D
on
e
Ti
me
r T
imi
ng
Ti
me
r En
ab
le
Default x x x x x x x x x x x x x 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = False
1 = True
Delay
Timer 2
1113
1117 00
DelayTimer 2 Data
1115 DelayTimer 2PrSet
1116
DelayTimer 2 Stats
DelayTimer 2Accum 1114 DelayTimer 2 Bit
00
00 Enabled
Timing
Done
Options
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Ti
m
er
D
on
e
Ti
me
r T
imi
ng
Ti
m
er
E
na
bl
e
Default x x x x x x x x x x x x x 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = False
1 = True
A
A
A