MTS FlexTest Models 200 - Manual (Page 97)

Model 494.44 Two-Station System Board
MTS FlexTest® Models 40/60/100/200 Controller Hardware FlexTest Controller Configurations 97
J54 Digital Input Connections for the Model 494.44 System Board
Connector J54 Dig In accepts up to eight optically isolated digital-input signals
from the Model 494.32 8-Channel DI/O Breakout Box. You can use these digital
input signals to trigger test events in controller applications.
Note Digital input power for the breakout box is brought in through breakout-
box connector J19.
Cable specification
To maintain EMC compliance, the J54 Digital Input cable must comply with the
following specifications:
Connector type–9-pin, D type, female EMI connector.
Back shell–EMI metallized plastic or metal.
Cable–AWG and number of conductors as required. Braided shield with shield
connected to the metallized backshell at the chassis and at the DI/O Breakout
box.
DI 2
DI 1
DI 3
DI 4
DI 5
DI 6
DI 7
DI 8
494.44 System Board J54 Dig In
Power
100-240 VAC 50-60 Hz, 1-2 A
DA Output
J24
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
LAN 2 LAN 1
DEBUG MOT OROLA
10/100 BASE T 10/100 BASE T
SCSI BUSY PIB BUSY PCI MEZZANINE CARD PCI MEZZANINE CARD
J55 Dig Out
Dig In J54
J43A
J43B
J49
Aux Pwr
Estop/Run J23 Interlock
J29A
J29B
Load Frame
J28 HSM
A-B
HPU J25
494.32 DIO Breakout Box
J54 Dig In J10 Inputs
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9