MTS FlexTest Models 200 - Manual (Page 255)

Model 493.74 Two-Station HSM Interface Board
MTS FlexTest® Models 40/60/100/200 Controller Hardware Digital I/O and Transition Boards 255
J49 Auxiliary Power Connections for the 493.74 HSM Board
Connector J49 Aux Pwr provides auxiliary power outputs for: +5 V DC,
+15 V DC, -15 V DC, and +24 V DC.
Cable specification
To maintain EMC compliance, J49 Aux Power cables must comply with the
following specifications:
Connector–9-contact, type D, male EMI connector.
Backshell–EMI metallized plastic or metal.
Cable–AWG and number of conductors as required. Braided shield with
shield connected to the metallized backshell at the chassis.
+24 V
-15V
+ 15 V
+24 V
Ground (+24 V)
+5V
J49
493.74 HSM Board
1
6
2
7
3
4
5
8
9
+/- 15 V DC J49-1 Ground (+/- 15 V)
Ground (+/- 15 V)
- 15 V
+15V
Ground (+5 V)
+ 5 V
+5 V DC
+24 V DC
+ 15 V
Intlk
J28B HSM
R
J43-1 J43-2
Run/Stop J44-1 J44-2
Aux Power J49-1 J49-2
Load Frame J29-1 J29-2
J28A HSM
J49-2
493.74
HSM
Station