MTS FlexTest Models 200 - Manual (Page 338)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Model 793 Multibox Systems
Model 793 Multibox Systems 338
Task 5 Use the Station Builder Application to Create a
Multibox Configuration
Once you have use the Controller Management Tool (CMT) application to
register and configure the multibox system and created Hwi files for each box,
you can use the Station Builder application to create the configurations required
for your test.
Multibox configurations are created in the same manner as single-box systems
with the following exceptions:
• The resources shown in the Station Builder application are grouped by the
box where they are installed.
• All the hardware resources used in a control channel must reside in the same
box.
Important Control channels that use hardware resources from one box
cannot include hardware resources from another box.
For more information
For more information on how to create stations, see the MTS Series 793 Control
Software manual (PN 100-147-130).
• A pdf version of this manual is available through the Start > MTS 793
Software > Electronic Documentation menu.
• You can also select 793 Control Software from the Station Builder Help
menu to view an on-line help window.