MTS FlexTest Models 200 - Manual (Page 86)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Model 494.44 Two-Station System Board
FlexTest Controller Configurations 86
Interlock Input
Interlock Trip
Voltage
Maximum Input
Voltage
Input Resistance
Interlock Power
Output
Connector J43 A/B (D9S) (one per J43 connector)
0.8 V minimum, 3 V maximum
+26 V DC
2700 Ω
+24 V DC (current limited by a 15-K Ω resistor)
Load Frame
E-Stop
Crosshead Unlock
Output
Program Interlock
Input
Connector J29A and J29B (D15S)
24 V DC at 1 A
Switch Contact Closed = no program interlock
Switch Contact Open = program interlock
HPU Outputs
(Start/Low/High)
HPU Outputs
(start, low, high)
HPU ON Input
Connector J25 (D15P)
Output Voltage: 24 V DC at 250 mA
Trip Voltage: 0.8–10.0 V DC
Maximum Input Voltage: +26 V DC
HPU Interlock
Inputs (Low Level
and Overtemp)
Trip-point Voltage
Connector J25 (D15P)
0.8–10.0 V DC
Maximum Input Voltage: +26 V DC
Model 494.44 Specifications (part 2 of 3)
P ARAMETER S PECIFICATION