MTS FlexTest Models 200 - Manual (Page 239)

Model 493.73 HPU Interface Board
MTS FlexTest® Models 40/60/100/200 Controller Hardware Digital I/O and Transition Boards 239
Specifications–Model 493.73 HPU Interface Board
Model 493.73 Specifications
P ARAMETER S PECIFICATION
E-Stop Output*
Voltage
Current
Connector J23 (D9S)
24 V DC/AC maximum
1 A maximum
Normally Open Contacts: Open = E-Stop Active
Normally Closed Contacts: Closed = E-Stop Active
* The E-Stop relay is de-energized when an E-Stop is
active.
E-Stop Input
Voltage
Current
Connector J24 (D15S)
24 V DC maximum
25 mA maximum
Digital Inputs
Input OFF Trip
Voltage
Input ON Trip
Voltage
Maximum Voltage
Input Resistance
Digital Input Power
Output
Connector J54, (D15S)
≤ 0.8 V DC
>3.0 V DC at 0.3 mA to 26 V DC at 3.8 mA
+ 26 V DC
2.7 K Ω
+ 24 V DC (current limited by 6.6 K Ω resistor)
Digital Output
Maximum Voltage
Typical Output
Current
Connector J54, (D15S)
26 V DC
30 mA at 1 V