MTS FlexTest Models 200 - Manual (Page 53)

Model 494.41 Single-Station System Board
MTS FlexTest® Models 40/60/100/200 Controller Hardware FlexTest Controller Configurations 53
Model 494.41 System Board Specifications
Model 494.41 Specifications (part 1 of 3)
P ARAMETER S PECIFICATION
HSM Control*
Off/Low/High
Control
Low Output
High Output
Proportional
Control
Signal Output
Solenoid
Impedance
Ramp Time
(0 to full scale)
Connector J28 (CPC-4S)
+24 V DC, 1.0 A maximum
+24 V DC, 1.0 A maximum
0–0.78 A
20– 25 Ω
2.1 s or 4.2 s (software selectable)
* The type of HSM control (off/low/high or
proportional) is software configurable.
Interlock Output
Relay
Voltage
Current
Connector J43 (D9S)
30 V DC/AC maximum
1 A maximum
Normally Open Relay Contacts: Open = Interlock
Normally Closed Relay Contacts: Closed = Interlock
Interlock Input
Interlock Trip
Voltage
Maximum Input
Voltage
Input Resistance
Interlock Power
Output
Connector J43 (D9S)
0.8 V minimum, 3 V maximum
+26 V DC
2700 Ω
+24 V DC (current limited by a 6.6-K Ω resistor)