MTS FlexTest Models 200 - Manual (Page 315)

Aero Multibox Overview
MTS FlexTest® Models 40/60/100/200 Controller Hardware Aero Multibox Systems 315
Reboot the Controllers
Once you have used the Controller Management Tool (CMT) to name all the
controllers and define their Controller Type (master or dependent) you must use
the CMT to reboot all the controllers.
1. In the CMT window, select each controller one at a time and click Reboot.
The CMT window will go blank until the controllers have completed their
reboots and come on line again.
2. Check the CMT window to make sure that all the controllers have rebooted
successfully with the correct controller name and type.