MTS FlexTest Models 200 - Manual (Page 260)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Model 493.80 Encoder Interface Board
Digital I/O and Transition Boards 260
Mode Settings for the Model 493.80 Encoder Interface Board
Each channel on the Model 493.80 board includes jumpers that you can
configure for various modes.
Note When used with the Model 494.49 Quad Encoder board, the jumper
setting for each channel’s mode must be the same (all SSI or all
non-SSI).
Mode settings include:
• SSI devices–such as Temposonics R transducers, Gurley and other
absolute encoders
• Non-SSI devices–such as incremental encoders, and PWM devices
such as Temposonics G transducers.
493.80 Encoder Interface Board
Mode Settings
X19
Channel 1
= Non-SSI Device
Channel 2
Channel 3
Channel 4
= SSI Device
J3 J4 J5 J6
X3 X4 X5 X6
J11 J12
X7 X8 X9 X10 X1
1
X12 X13 X14
X15 X16 X17 X18
X19
Mode Settings for use with
Model 494.49 Quad Encoder Card
X19
= SSI Devices
= Non-SSI Devices X19