MTS FlexTest Models 200 - Manual (Page 70)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Model 494.42 Single-Station System Board
FlexTest Controller Configurations 70
Interlock Input
Interlock Trip
Voltage
Maximum Input
Voltage
Input Resistance
Interlock Power
Output
Connector J43 (D9S)
0.8 V minimum, 3 V maximum
+26 V DC
2700 Ω
+24 V DC (current limited by a 15-K Ω resistor)
Event Switch-
Contact Input Connector J43 (D9S)
Event contacts open= Active event
Event contacts closed= Inactive event
Auxiliary Power
Outputs
+5 V DC
+15 V DC
-15 V DC
+24 V DC
Connector J49 (D9S)
0.75 A maximum
0.75 A maximum
0.75 A maximum
0.75 A maximum
Digital Inputs
Input ON/OFF Trip
Voltage
Maximum Input
Voltage
Input Resistance
Digital Input Power
Output
Connector J54 (D9P)
0.8–3 V DC
+ 26 V DC
2.7 K Ω
+ 24 V DC (current limited by 2.7-K Ω resistor)
Model 494.42 Specifications (part 3 of 4)
P ARAMETER S PECIFICATION