MTS FlexTest Models 200 - Manual (Page 55)

Model 494.41 Single-Station System Board
MTS FlexTest® Models 40/60/100/200 Controller Hardware FlexTest Controller Configurations 55
Digital Output
Relays
Voltage
Current
Output logic
Aux. Voltage
Connector J55 (D9S)
30 V AC/DC maximum
1 A maximum
Output 1: One normally open (NO) contact
Open = Output is OFF
Output 2: One normally open (NO) contact and one
normally closed (NC) contact
NO Contact: Open = Output is OFF
NC Contact: Closed = Output is OFF
Output 3: One normally open (NO) contact
Open = Output is OFF
24 V DC, 0.75 A at 40ºC
Digital Inputs
Input ON/OFF Trip
Voltage
Maximum Input
Voltage
Input Resistance
Digital Input Power
Output
Connector J54 (D9P)
0.8–3 V DC
+ 26 V DC
2.7 K Ω
+ 24 V DC (current limited by 6.6-K Ω resistor)
D/A Outputs
Resolution
Output Type
Output Voltage
Output Current
Connector "D/A Output" (D9P)
16 bit
Single ended
+/- 10 V full scale
5.0 mA maximum
Note This connector is located on the rear panel
of the 494.04 chassis.
Model 494.41 Specifications (part 3 of 3)
P ARAMETER S PECIFICATION