Cable specifications – MTS FlexTest Models 200 User Manual

Page 240

MTS FlexTest® Models 40/60/100/200 Controller Hardware

Model 493.73 HPU Interface Board

Digital I/O and Transition Boards

240

J23 E-Stop Output Connections for the Model 493.73 HPU Interface Board

Connector J23 E-STOP Out provides a set of E-Stop relay contacts that can
be used with external devices. An E-Stop on any of the E-Stop buttons
connected to the chassis will de-energize the E-Stop relay.

Cable specifications

To maintain EMC compliance, 23 E-STOP Out cables must comply with
the following specifications:

Connector —9-contact, type D, female EMI connector.

Backshell–EMI metallized plastic or metal.

Cable—AWG and number of conductors as required. Braided shield with
shield connected to the metallized backshell at the chassis.

This manual is related to the following products:

FlexTest Models 100 FlexTest Models 60 FlexTest Models 40 494 Controller Hardware FT 200 494 Controller Hardware FT 100 494 Controller Hardware FT 60 494 Controller Hardware FT 40