Environmental requirements—series 494 hardware, Environmental requirements—series 494 hardware 35 – MTS FlexTest Models 200 User Manual

Page 35

Installation

MTS FlexTest® Models 40/60/100/200 Controller Hardware

FlexTest Controller Configurations

Environmental Requirements—Series 494 Hardware

All Series 494 hardware components are intended for indoor use only. This
indoor environment must conform to the following environmental specifications.

Note

All Series 494 Controller must only be operated under the installation
and ambient conditions (such as, temperature, moisture, and EMC)
specified.

Note

To maintain EMC compliance, the controller must be installed in a
location that does not exceed the EN 61000-6-4 emission standard for
industrial environments.

ARAMETER

PECIFICATION

Temperature

5ºC–40ºC (41ºF–104ºF)

Humidity

5–85%, non-condensing

Altitude

3048 m (10,000 ft) maximum

Space
Requirements

For proper ventilation, allow 51 mm (2 in) clearance
on all sides of the chassis.
The rear of the chassis requires a minimum
clearance of 15.24 cm (6 in) for cable connections.

This manual is related to the following products:

FlexTest Models 100 FlexTest Models 60 FlexTest Models 40 494 Controller Hardware FT 200 494 Controller Hardware FT 100 494 Controller Hardware FT 60 494 Controller Hardware FT 40