MTS FlexTest Models 200 - Manual (Page 19)

Safety Information
MTS FlexTest® Models 40/60/100/200 Controller Hardware Safety Information 19
EC Declaration of Conformity for MTS Models 494.04 (FlexTest 40),
494.06 (FlexTest 60), 494.10 (FlexTest 100) and 494.20 (FlexTest 200
)
Description of Models The MTS Series 494 Electronics Control Chassis’ are VMEbus chassis’ that can
house up to twenty VMEbus modules in the front of the chassis and up to twenty
MTS Systems Corporation transition modules in the rear panel of the chassis.
The chassis can be configured with a variety of MTS VMEbus plug-in modules
and related transition modules.
Manufacturer
MTS Systems Corporation
14000 Technology Drive
Eden Prairie, MN, USA 55344-2290
Phone: 952-937-4000
Directives
Low Voltage directive 2006/95/EEC and the EMC directive 2004/108/EC.
Standards
EN 61010-1: Safety requirements for electrical equipment for measurement,
control and laboratory use, Part 1: General requirements
EN 61000-6-2: Electromagnetic Compatibility, Generic Standards - Immunity for
Industrial Environments.
EN 61000-6-4: Electromagnetic Compatibility, Generic Standards - Emission
standard for Industrial Environments.
D ESCRIPTION B ASIC S TANDARD T EST S PECIFICATION
Limits for harmonic current
emissions EN 61000-3-2 Class A
Limits for voltage fluctuations and
flicker EN 61000-3-3 Class A
Electrostatic discharge EN 61000-4-2 +/- 4 kV contact discharge
+/- 8 kV air discharge
Performance Criteria B
Radio frequency electromagnetic
field, amplitude modulated EN 61000-4-3 10 V/m
Performance Criteria A
Electrical fast transient EN 61000-4-4 2 kV mains
2 kV control and signal
Performance Criteria B