MTS FlexTest Models 200 - Manual (Page 118)

MTS FlexTest® Models 40/60/100/200 Controller Hardware
Processor Connections
VME Bus Boards 118
Processor Connections
Computer Workstation Connections
The computer workstation is connected to the Model 494.96 Processor board
installed in the VME bus of the chassis through an Ethernet 10/100 Base-T
connection. The computer workstation must have a dedicated Ethernet-
compatible connector.
Several boards have connectors that look similar to a phone connector.
Connecting telecommunications equipment cables to boards in the
controller chassis can damage the electrical components of the chassis or
your telecommunications system.
Limit the possibility of damaging boards by only using the connector types
recommended by MTS.
m
LAN 1
LAN 2
LAN 1
DEBUG
MOTOROLA
10/100 BASE T
10/100 BASE T
SCSI BUSY
PIB BUSY PCI MEZZANINE CARD
PCI MEZZANINE CARD
CAUTION