Xerox 4112-4127 Enterprise Printing System-192 User Manual
Page 96
PDL principles and procedures
1-70
Using LCDS Print Description Language
Correcting errors in a JSL
If errors are encountered in a JSL while it is being compiled, the
following message appears in the Terminal window:
**********JSL CONTAINS ERROR(S)**********
Figure 1-20. Terminal window displaying compiling
messages for a JSL with errors
The system does not create a .JDL file in the “lcds” folder, but it
does create a .LST file, which shows where the errors are.
1. Open and inspect the .LST file to locate the errors that
prevented the JSL from compiling.
To open a .LST file:
a. Open a UNIX Text Editor window. Refer to the “Full JSL
coding procedure” earlier in this chapter for instructions.
b. From the File menu on the Text Editor window, select
[Open] to display the Text Editor – Open a File window.