Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 131)

Specifying input parameters
Using LCDS Print Description Language 2-23
ac identifier A command identifier of the type ac is optional for the first
DBCODE command within a JDE. Thereafter, each additional
DBCODE command must include the identifier. The ac identifier
consists of 1 to 6 alphanumeric characters (A through Z and 0
through 9). One of the characters must be alphabetic.
DBCODE command parameters
The following table summarizes the DBCODE command
parameters.
The following sections describe the syntax of the DBCODE
command parameters and explain the parameter options.
DBCODE ASSIGN
Defines double-byte character code assignment exceptions or
an entire user character translation table.
Syntax ac: DBCODE ASSIGN = {(input, output) | (input, (output
1
[,
output
2
] [,...])}
Options
Default No default
Table 2-19. Summary of DBCODE command parameters
Parameter Specifies Online Offline DJDE
DBCODE ASSIGN Defines user double-byte code assignments. Y N N
DBCODE
DEFAULT Specifies a base code from which double-byte
character code assignment exceptions can be
made. Y N N
Table 2-20. DBCODE ASSIGN parameter options and definitions
Option Definition
input A numeric constant that defines the input double-byte code.
output A numeric constant that defines the output double-byte code that corresponds
to the input code