Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 393)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-39
GDATA DJDE
Specifies the starting point of the graphic data from the
beginning of the user portion of a data record.
Type Record oriented
Syntax GDATA = offset, termination
Options
GRAPHIC DJDE
Specifies that the DJDE is a graphic sentinel. That is, it
immediately precedes and identifies a graphic in the report data
stream.
NOTE: This DJDE, when specified, must be the only DJDE in its
packet.
Type Record oriented
Syntax GRAPHIC = (name, vpos [units], hpos [units], [,H] [,n [/d]] [,
(INKS, inkref
1
[, inkref
2
])])
(If no other DJDEs are specified, the parentheses may be
omitted.)
Table 5-28. GDATA DJDE options and definitions
Option Definition
offset The starting point within the record of the graphic data that will be downloaded.
termination The terminating byte of the record. The options are:
•
DEFAULT
–
If online, a single terminating byte exists.
– If offline, no terminating byte exists.
• n: The number of terminating bytes that exist