Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 137)

Specifying input parameters
Using LCDS Print Description Language 2-29
KCODE ASSIGN
Defines double-byte character code assignment exceptions or
an entire user character translation table.
Syntax ac: KCODE ASSIGN = {(input, output) | (input, (output
1
[,
output
2
] [,...])}
Options
Default No default
KCODE DEFAULT
Specifies a base code from which you can make double-byte
character code assignment exceptions.
The base code is specified by a codetype; the exceptions are
specified in the ASSIGN parameter.
Syntax ac: KCODE DEFAULT = codetype
Options
Default No default
Table 2-29. KCODE ASSIGN parameter options and definitions
Option Definition
input A numeric constant that defines the input double-byte code.
output A numeric constant that defines the output double-byte code that corresponds
to the input code
Table 2-30. KCODE DEFAULT parameter options and definitions
Option Definition
codetype Keyword for one the following double-byte codes:
•
IBM: Specifies the IBM Nihongo character set (Kanji double-byte sets)
• JEF: Specifies the Fujitsu JEF Kanji double-byte character set.
• JIS
• KEIS: Specifies the Hitachi KEIS Kanji double-byte character set