Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 164)

Specifying input parameters
2-56 Using LCDS Print Description Language
VOLUME BMULT
Specifies a multiplication factor that you can use to determine
the true block length.
Syntax VOLUME BMULT = value
Options
Default 1
VOLUME CODE
Specifies which code translation table the system uses to
interpret the input data.
Syntax VOLUME CODE = {keyword | id | NONE}
Options
Table 2-57. VOLUME BMULT parameter options and definitions
Option Definition
value An integer from 1 to 15 that you extract from the tape label and apply as a
multiplication factor to the block length to determine the true block length
Table 2-58. VOLUME CODE parameter options and definitions
Option Definition
keyword Specifies a specific, standard, system defined code translation table. The
available options are:
•
ASCII
• BCD
• EBCDIC
• H2BCD
• H6BCD
• IBMBCD
• NONE
• PEBCDIC
• USER (Refers to the single unlabeled CODE command defined within the
JDL.)
id Specifies an identifier label that you used in a previously defined CODE
command. The id label is required when multiple CODE commands are
contained within the JDL.
NONE Specifies that data will not be translated by input processing.