Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 397)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-43
Options
IDFAULT DJDE: point to note
Only saturated primary colors can be specified by this DJDE.
IDR DJDE
Specifies the ink descriptor entry that will be used for subsequent
pages. Refer to the “IDR command” section in the “Specifying
print format parameters” chapter for an explanation of what is
defined in an IDR.
Type Page oriented
Syntax IDR = idrname
Options
ILIST DJDE
Specifies a list of all the inks that may be referenced by the ink
index on the page.
Type Page oriented
Syntax ILIST = ‘inkname’ | (‘inkname
1
’, [‘inkname
2
’] [, ...])
Table 5-31. IDFAULT DJDE options and definitions
Option Definition
‘inkref’’ ink reference
The default ink that will be used for all objects that do not specify an ink.
Table 5-32. IDR DJDE options and definitions
Option Definition
idrname ink descriptor reference name
The name of the IDR (previously defined by an IDR command in the JSL) that
will be used for subsequent pages.