Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 167)

Specifying input parameters
Using LCDS Print Description Language 2-59
VOLUME EOV
Specifies the action the system takes when it encounters an end
of volume (EOV) on the input data tape.
Syntax VOLUME EOV = ([PAUSE | NOPAUSE], [EOF | NOEOF])
Options
Defaults NOPAUSE, NOEOF
VOLUME EXPAGE
Enables data error logging and reporting of unprintable
characters that do not have font bitmap or outline data in the font
file. (Errors are flagged on a separate page.)
Syntax VOLUME EXPAGE = {YES | NO}
Table 2-62. VOLUME EOV parameter options and definitions
Option Definition
PAUSE Displays a message when EOV is encountered. A CONTINUE response by the
operator causes the tape to rewind and the normal volume change sequence to
proceed.
NOPAUSE Issues a rewind instruction as soon as the EOV label is processed.
EOF End of file.
Specifies that the end-of-volume label is treated as an end-of-file label. When
this occurs, the first part of the page spanning the volumes is output as the last
page of the job. The second part of the spanned page is printed as the first
page when the next volume is started, with possible page format irregularities.
To use the EOF parameter effectively, special user-formatting of the multireel
tapes is required to avoid these page format problems.
NOEOF No end of file.
Specifies normal end of volume processing.