Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 72)

PDL principles and procedures
1-46 Using LCDS Print Description Language
NOTE: This JSL contains some highlight color commands and
parameters: IDR, ILIST, ICATALOG, and IDEFAULT. These
commands are processed, but most have no effect on the output
if the JSL is used to print on the FreeFlow Print Server LCDS
systems. However, if the JSL is used on a highlight color printing
system such as the Xerox 4890 LPS, the commands are
followed. Refer to “Printing highlight color applications on
FreeFlow Print Server LCDS systems” in this chapter for
information on how color commands are treated by the FreeFlow
Print Server LCDS systems.
Table 1-8. Sample JSL
JDLHLC: JDL;
/*System level commands*/
VFU1: VFU ASSIGN=(1,5), ASSIGN=(2,10),
ASSIGN=(3,15), TOF=5, BOF=66;
PDE1: PDE BEGIN=(175 DOTS, 00 XDOTS),
FONTS=(UN110E, PR110E, PR124B);
PDE2: PDE FONTS=(L0512C, L05SCA, L05ITA),
PMODE=LANDSCAPE,
BEGIN=(0.725IN, 1.000 IN);
IDR1: IDR ILIST=(’RED’,’BLACK’,’PINK’);
/***IDFAULT =’RED’***/
IDR2: IDR ICATALOG=XEROX, PALETTE =’PICTORIAL’,
ILIST=(’BLACK’,’RED’,’PALE PINK’);
/*IDFAULT =’BLACK’*/
T1: TABLE CONSTANT=(A’REPORT’);
C1: CRI CONSTANT=(2, 6, EQ, T1);
VOLUME HOST=IBMONL, CODE=ASCII;
RECORD LENGTH=136, STRUCTURE=VB, LTHFLD=2,
ADJUST=0,FORMAT=BIN,PREAMBLE=3;
LINE DATA=(1,132), OVERPRINT=(PRINT,NODISP),
VFU=VFU1;
IDEN PREFIX=A’DJDE’, SKIP=6, OFFSET=2,
OPRINFO=YES;
RSTACK TEST=(C1), DELIMITER=YES;
ACCT USER=BIN;