Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 365)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-11
• If DJDEs are located at the start of a report, they invoke
changes beginning with the first page of the report (or report
copy).
Table 5-4. Page oriented DJDEs
DJDE Function
BEGIN Specifies the location of the starting print line of each logical page.
BFORM Specifies that a form will be printed on the back side of each printed
page.
COLLATE Specifies whether the pages of a job are to be collated (placed into sets
ordered the way the pages are printed) or uncollated (all copies of a
page are placed together).
COPIES Specifies the number of copies of the pages (also called sets) to
produce.
DEPT Specifies the name under which accounting statistics for reports are
accumulated.
NOTE: The DP 2000 Series EPS place this information in the
accounting log. You can print out the values.
DESTINATION Specifies the output destination of printed pages.
DUPLEX Specifies whether both sides of a piece of paper are printed (duplex) or
only the top side (simplex). (Simplex and duplex are also called “1-sided”
and “2-sided.”
FEED Controls the stock on which pages are printed.
FONTINDEX Specifies the location in the input record where an index to the specified
font is stored.
FONTS Specifies the fonts used for printing.
FORMAT Specifies a new page descriptor entry (PDE) to use for formatting
control.
FORM[S] Specifies the form to be merged onto the printed pages.
ICATALOG Specifies an ink catalog that contains palettes and inks for subsequent
pages.
IDFAULT Specifies a default ink for objects for which no ink was specified.
IDR Specifies the ink descriptor reference (IDR) that will be used for
subsequent pages.
ILIST Specifies a list of all the inks that may be referenced by the ink index on
the page.
INKINDEX Specifies a field within a data record that contains a number
representing the ink index in the current ILIST.
INVERT Specifies that the subsequent page content will be inverted 180 degrees
on the physical page.