Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 237)

Using logical processing
Using LCDS Print Description Language 3-57
Options
Default NONE
RSTACK PRINT
If DELIMITER=YES is coded, specifies if the report delimiters will
be printed, and if so, the output destination of the printed
delimiters.
Syntax RSTACK PRINT = {BIN | BOTH | TRAY | NONE}
Options
Default NONE
RSTACK PRINT
parameter: points
to note
• If DELIMITER=NO has been coded, no page is printed.
• If the report is being printed in duplex mode, report delimiters
are printed on at most one side of a two sided page.
Table 3-42. RSTACK HRPTNA parameter options and definitions
Option Definition
offset The amount of space, specified in bytes (relative to zero), from the start of the
user portion of the record to the subfield within the record.
length The number of bytes in the subfield (1 to 16).
NONE Specifies no report name is selected.
Table 3-43. RSTACK PRINT parameter options and definitions
Options Definitions
BIN Specifies that report delimiters will be printed and the output will be delivered to
the stacker tray.
BOTH Specifies that report delimiters will be printed, and the output will be delivered
to both the sample tray and the stacker tray.
TRAY Specifies that report delimiters will be printed and the output will be delivered to
the sample tray.
NONE Specifies that report delimiters will not be printed.