Xerox 4112-4127 Enterprise Printing System-192 User Manual
Page 409
Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language
5-55
MODIFY DJDE: points to note
•
Any CME invoked by a DJDE must be catalogued separately.
Refer to the “Catalogued CMEs” section in the “Specifying
print format parameters” chapter for further information.
•
The MODIFY DJDE takes effect at the next logical page
boundary.
•
The MODIFY DJDE parameters are the same as those for
the OUTPUT MODIFY command.
•
For the DP 2000 Series EPS, copy variant CMEs (also called
“copy sensitive CMEs”) are not supported. Multiple copy
output yields duplicate copies of copy 1. Only the CME that
applies to copy 1 appears, and it appears on all copies.
NUMBER DJDE
Specifies page number properties and occurrence. This DJDE
takes effect at the next logical page boundary.
Type
Page oriented
Syntax
NUMBER = {(pnum, lnum, cnum [, [findex] [,inkref]]) | NO}
copies
Specifies the number of plies (passes) on which to apply the CME. If copies is
not specified, then the CME applies to all copies beginning with the copy
number specified by init.
NONE
Specifies that no CMEs will be applied; data is processed without modification.
Table 5-45. MODIFY DJDE options and definitions (Continued)
Option
Definition