Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 136)

Specifying input parameters
2-28 Using LCDS Print Description Language
IDEN command example
KCODE command
Defines a double-byte character code translation table.
When you require a user defined translation table of double-byte
character codes, you define the double-byte character
translation using the KCODE command, then reference this
command using the VOLUME KCODE parameter. As an
alternative, you can use the USER option of the VOLUME
KCODE parameter to reference the KC ODE command for which
no identifier was provided.
ac identifier A command identifier of the type ac is optional for the first
KCODE command within a JDE. Thereafter, each additional
KCODE command must include the identifier. The ac identifier
consists of 1 to 6 alphanumeric characters (A through Z and 0
through 9). One of the characters must be alphabetic.
KCODE command parameters
The following table summarizes the KCODE command
parameters.
The following sections describe the syntax of the KC ODE
command parameters and explain the parameter options.
IDEN PREFIX=’RTEST’, SKIP=9, OFFSET=3,
OPRINFO=YES, DJPCC=IGNORE;
Table 2-28. Summary of KCODE command parameters
Parameter Specifies Online Offline DJDE
KCODE ASSIGN Defines user double-byte code assignments. Y N N
KCODE
DEFAULT Specifies a base code from which double-byte
character code assignment exceptions can be
made. Y N N