Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 346)

Specifying print format parameters
4-106 Using LCDS Print Description Language
STOCKSET command parameters
The following table summarizes the STOCKSET command
parameters.
STOCKSET ASSIGN
Associates stocks with an identified stock reference or with other
stocks to create a stock set that will be used together in an
application.
Syntax [ac]: STOCKSET ASSIGN = (stockdescriptor
1
[, stockdescriptor
2
] [,...])
Options
Default No default
Example of use of
STOCKSET
ASSIGN
ASSIGN = ((’F1302’, COVER),(’F1415’, BODY))
Table 4-90. Summary of STOCKSET command parameters
Parameter Specifies Online Offline DJDE
STOCKSET ASSIGN Lists stock names and associates them with
stock references. Y Y N
STOCKSET INIFEED Specifies which stock to use in the absence of
any designation in the OUTPUT FEED
parameter. Y Y N
STOCKSET
SYSPAGE Specifies the stock on which system
generated pages will print. Y Y N
Table 4-91. STOCKSET ASSIGN parameter options and definitions
Option Definition
stockdescriptor
Can have one of the following formats:
•
‘stockname’
• (’stockname’, stockreference)
• (‘stockname’, stockreference
[, stockreference [,...]])
• Stockname is the specific name of a stock. It is
enclosed in single quotes.
• Stockreference is an alternate term for referencing
the named stock. It is common to assign the
stockreference according to its function in the job or
some other characteristic.
A stockreference may be assigned to only one
stockname.