Xerox 4112-4127 Enterprise Printing System-192 User Manual
Page 50
PDL principles and procedures
1-24
Using LCDS Print Description Language
Specifying formats
(PDEs)
There are many standard formats or print description entries
(PDEs) available for your JSL. These formats are listed in the
“PDE command” section of the “Specifying print format
parameters” in Chapter 4. PDEs, like VFUs, require
identification; for example:
Using copy
modification
entries
Copy modification entries (CMEs) allow you to change certain
parts of static data in report output and to change fonts within
variable data. Below are some sample CMEs:
Defining character
code translation
tables
CODE commands define character translation tables used to
convert input job data into printed characters. For example:
Coding other system level commands
System level commands without identifiers should be indented
under the commands with identifiers. One exception is the JDL
name command, which precedes the identifier commands and is
not indented.
The following sections discuss several other commands that are
usually coded at system level and that do not require identifiers.
PDE1: PDE
BEGIN=(0.18IN,0.66IN),
FONT=(L0112B,L01BOA),
PMODE=LANDSCAPE;
PDE2: PDE
BEGIN=(1.03,.51),
BEGIN=(6.30,.51),
FONTS=P1012A, PMODE=PORTRAIT;
CME1: CME
LINE=(9,–), POS=1, FONT=1;
CME2: CME
LINE=3, POS=59,
CONSTANT='FIRST QUARTER’;
C1: CODE DEFAULT= EBCDIC;
ASSIGN= (’\’, ’/’);