Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 105)

PDL principles and procedures
Using LCDS Print Description Language 1-79
Printing highlight color applications on FreeFlow Print Server LCDS
systems
If you have a Xerox 4850, 4890, or DP92C HighLight Color LPS,
or the FreeFlow Print Server-based Xerox DT128/155/180 HLC
Printing System, your applications probably include the use of
highlight color (one color plus black). The JDLs used to print
these applications contain commands and parameters that
specify the location and the color ink to be used. These color
JDLs may also contain commands indicating what the system
should do if a JDL specifies a different color ink from what is
loaded in the printer.
The FreeFlow Print Server LCDS systems can print jobs that
were designed for the 4850, 4890, or DP92C LPS and contain
color commands. When you run a highlight color job on non-
highlight-color systems, the job prints in black ink. (Some solid
colored or shaded areas may print in various shades of gray.)
The following table lists the highlight color related PDL
commands, parameters, and DJDEs.
Table 1-15. Highlight color commands
Command Color parameter
DJDE
available?
ABNORMAL IMISMATCH No
ISUBSTITUTE No
CME INKS No
IDR ICATALOG Yes
ILIST Yes
PALETTES Yes
LINE INKINDEX Yes
LMODIFY INK No
SELECT No
TEST No
OUTPUT FORMS Yes
GRAPHICS Yes
IDFAULT Yes
IDR Yes