Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 309)

Specifying print format parameters
Using LCDS Print Description Language 4-69
Default NO
OUTPUT NUMBER
parameter: points
to note
• The page number character string is placed on the page at
the specified line number, based on the line spacing of the
specified font. If override line spacing is specified for the font,
it does not affect where the page number character string is
to be printed.
• If both BFORM and NUMBER are specified, BFORM pages
are numbered.
OUTPUT NUMBER
parameter
example
OUTPUT NUMBER=(1, 1, 40, 1);
OUTPUT OFFSET
Specifies offsetting of output in the stacker on a report basis.
Syntax OUTPUT OFFSET = {ALL | FIRST | NONE}
Options
Default ALL
inkref ink reference.
Specifies the reference number for the ink with which the page number will be
printed.
NO Specifies that no page numbering is to be performed.
Table 4-65. OUTPUT NUMBER parameter options and definitions (Continued)
Option Definition
Table 4-66. OUTPUT OFFSET parameter options and
definitions
Option Definition
ALL Results in an offset of each copy of each report.
FIRST Specifies that an offset is to occur only on the first copy of a report.
NONE Specifies that there will be no offsetting at any time.