Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 161)

Specifying input parameters
Using LCDS Print Description Language 2-53
Options
Default No default
TCODE command examples
Following are a few examples of how to use the TCODE
command.
Example 1 The basic character set used for default types is ASCII. The
keyboard display has uppercase and lowercase character
capability:
Example 2 The basic character set used for default types is EBCDIC. The
keyboard display has uppercase and lowercase character
capability:
Example 3 The basic character set used for default types is ASCII. The
keyboard display is limited to uppercase only.
The # symbol functions as a case switching operator.
Table 2-55. TCODE TRESET parameter options and definitions
Option Definition
typespec A typespec may be coded as a single integer, n, within the range of 1 through
7.
NUMERIC may be used instead of 1; ALPHA may be used instead of 2.
inputspec An inputspec for this parameter is the same as defined for TASSIGN
parameter, or it can be ALL, which specifies that all characters in the code table
are disassociated from the specified types. The TRESET parameter may be
specified more than once in the TCODE command.
ALL Resets all types for all characters.
T1: TCODE DEFAULT= ASCII,
TASSIGN=(3,(A'A',-,A'Z')),
TASSIGN= (4,(A'a',–,A'z'));
T2: TCODE DEFAULT= EBCDIC,
TASSIGN= (3,('A',–,'I'),'J',–,'R'), ('S',–,'Z')),
TASSIGN= (4,'a',–,'i'),('j',–,'r'),('s',–,'z'));
T3: TCODE DEFAULT= ASCII,
TASSIGN=(3,(A'A',–,A'Z')),
TASSIGN= (4,(A'#A',–,A'#Z'));