Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 415)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-61
PALETTE DJDE example
PALETTE = ’SIMPLE’
PMODE DJDE
Specifies the text orientation for each page.
Type Page oriented
Syntax PMODE = {LANDSCAPE | PORTRAIT}
Options
PMODE DJDE: point to note
If PMODE is changed through a DJDE, the BEGIN DJDE should
be respecified (even if the same horizontal and vertical positions
were specified in the previous BEGIN DJDE).
RFORM DJDE
Specifies a form to be printed with all RTEXT pages. It takes
effect on the next RTEXT page. The options are the same as for
the ROUTE RFORM command.
Type Page oriented
Syntax RFORM = {formid [, (INKS, inkref
1
[, inkref
2
])] | NONE}
Table 5-50. PMODE DJDE options and definitions
Option Definition
LANDSCAPE Indicates that print lines will be parallel to the long edge of the
paper (for paper loaded with its short edge facing the feed
direction). Print lines on 11 by 17 inch paper are parallel to the
short edge.
PORTRAIT Indicates that print lines will be parallel to the short edge of the
paper (for paper loaded with its long edge facing the feed
direction). Print lines on 11 by 17 inch paper are parallel to the
long edge.