Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 502)

INDEX
INDEX-8 Using LCDS Print Description Language
TRANS parameter, 4-89
UNITS parameter, 4-89
XSHIFT parameter, 4-90
output command descriptions
see print format command descriptions
output parameters, specifying, 1-28
OVERPRINT DJDE, 5-59
OVERPRINT parameter
LINE command, 4-32
overrides
specifying during printing, 1-45
overriding commands, 1-40–1-47
ozone, xvii
P
packed data formats, 2-9
Page Interleaved format, 6-5
page numbers
specifying, 4-67, 5-55
page-oriented DJDEs, 5-10–5-12
pages
logical, 1-35
physical, 1-34
system, 1-34
PALETTE DJDE, 5-60
PALETTE parameter
IDR command, 4-23
PAPERSIZE parameter
OUTPUT command, 4-75
parameter
definition, 1-6
parameter options, 1-6
parentheses, 1-14
use in commands, 1-6
PASSES parameter
ROFFSET command, 3-40
PCC
see printer carriage control
PCC command, 2-30–2-36
ADVTAPE parameter, 2-31
ASSIGN parameter, 2-31
DEFAULT parameter, 2-33
INITIAL parameter, 2-34
MASK parameter, 2-35
PCC parameter
LINE command, 4-34
PCCTYPE parameter
LINE command, 4-35
PDE command, 1-24, 4-93–4-101
BEGIN parameter, 4-95
FONTS parameter, 4-98
PMODE parameter, 4-99
PDEs
specifying, 4-55
standard, 4-93
PDEs, specifying, 1-24
physical page, 1-34
pitch mode, 4-86–4-88, 5-70
PMODE DJDE, 5-61
PMODE parameter
PDE command, 4-99
portrait orientation, 1-37
POSITION parameter
CME command, 4-17
POSTAMBLE parameter
BLOCK command, 2-16
RECORD command, 2-40
PPI
see print position indexing
PREAMBLE parameter
BLOCK command, 2-17
RECORD command, 2-40
PREFIX parameter, IDEN command, 2-27
print format
command descriptions, 4-1–4-113
PRINT parameter
RSTACK command, 3-57
print position indexing, 2-5–2-6
printer carriage control, 2-30–2-36, 4-34, 4-35
DJDEs, 2-25
interaction with DJDEs, 5-10
printing
highlight color jobs, 1-79–1-81
proportional fonts, 1-39
PURGE parameter
OUTPUT command, 4-76
R
Random mode (graphics), 6-3
Random Mode Only format, 6-4
RAUX command, 3-33–3-35
RDELETE command, 3-35–3-37
TEST parameter, 3-35
record
formats, 2-9
length, 2-3, 2-38
selecting or deleting from a report, 3-35
structure, 2-10, 2-36–2-43
RECORD command, 2-36–2-43
ADJUST parameter, 2-36
CONSTANT parameter, 2-37
FORMAT parameter, 2-37
LENGTH parameter, 2-38
LMULT parameter, 2-39
LTHFLD parameter, 2-39
OFFSET parameter, 2-40
POSTAMBLE parameter, 2-40
PREAMBLE parameter, 2-40
STRUCTURE parameter, 2-41
record-oriented DJDEs, 5-13–5-14
records, 1-3
recovery, job