Xerox 4112-4127 Enterprise Printing System-192 - Manual (Page 401)

Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-47
Options
IRESULT DJDE
Specifies what the result will be when objects that are imaged
with different inks overlap.
Type Page oriented
Syntax IRESULT = {DEFAULT | BLACK | COLOR}
Options
IRESULT DJDE: points to note
• For monochrome printers, the COLOR and BLACK
parameters produce identical results (black).
• The color that results from overlapping objects may be only
black or only colored for an entire page. For example, a page
cannot have red text printed over a black background and
also black text printed over a red background.
Table 5-36. INVERT DJDE options and definitions
Option Definition
FRONT Specifies page inversion on front sides.
BACK Specifies page inversion on back sides.
BOTH Specifies page inversion on both front and back sides.
NONE Specifies no page inversion.
Table 5-37. IRESULT DJDE options and definitions
Option Definition
DEFAULT Specifies that the ink that was set as the system default IRESULT ink will
override when two different colored pixels overlap. The default IRESULT ink
may be black or colored.
NOTE: On the FreeFlow Print Server-based DT 128/155/180 HLC Printing
Systems, the default is Black.
BLACK Specifies that, when two objects that are imaged with different inks overlap,
and black and colored pixels coincide, the resulting pixel is black.
COLOR Specifies that, when two objects that are imaged with different inks overlap,
and black and colored pixels coincide, the resulting pixel is colored.